Simultaneous determination of 75 abuse drugs including amphetamines,benzodiazepines, cocaine,opioids, piperazines,zolpidem and metabolites in human hair samples using liquid chromatography–tandem mass spectrometry

A liquid chromatography–tandem mass spectrometric method for the simultaneous determination of 75 abuse drugs and metabolites, including 19 benzodiazepines, 19 amphetamines, two opiates, eight opioids, cocaine, lysergic acid diethylamide, zolpidem, three piperazines and 21 metabolites in human hair samples, was developed and validated. Ten‐milligram hair samples were decontaminated, pulverized using a ball mill, extracted with 1 mL of methanol spiked with 28 deuterated internal standards in an ultrasonic bath for 60 min at 50°C, and purified with Q‐sep dispersive solid‐phase extraction tubes. The purified extracts were evaporated to dryness and the residue was dissolved in 0.1 mL of 10% methanol. The 75 analytes were analyzed on an Acquity HSS T3 column using gradient elution of methanol and 0.1% formic acid and quantified in multiple reaction monitoring mode with positive electrospray ionization. Calibration curves were linear (r ≥ 0.9951) from the lower limit of quantitation (2–200 pg/mg depending on the drug) to 2000 pg/mg. The coefficients of variation and accuracy for intra‐ and inter‐assay analysis at three QC levels were 4.3–12.9% and 89.2–109.1%, respectively. The overall mean recovery ranged from 87.1 to 105.3%. This method was successfully applied to the analysis of 11 forensic hair samples obtained from drug abusers.     

Pericyclic reactions in the synthesis of new 5-aryl-5,6-dihydroquinolino[2,1-b]quinazolin-12-ones

1. Download high-res image (52KB)
2. Download full-size image

     

MAO‐free and extremely active catalytic system for ethylene tetramerization

The original Sasol catalytic system for ethylene tetramerization is composed of a Cr source, a PNP ligand, and MAO (methylaluminoxane). The use of expensive MAO in excess has been a critical concern in commercial operation. Many efforts have been made to replace MAO with non‐coordinating anions (e.g., [B(C₆F₅)₄]^?); however, most of such attempts were unsuccessful. Herein, an extremely active catalytic system that avoids the use of MAO is presented. The successive addition of two equivalent [H(OEt₂)₂]⁺[B(C₆F₅)₄]^? and one equivalent CrCl₃(THF)₃ to (acac)AlEt₂ and subsequent treatment with a PNP ligand [CH₃(CH₂)₁₆]₂C(H)N(PPh₂)₂ ( 1 ) yielded a complex presumably formulated as [ 1 ‐CrAl (acac)Cl₃(THF)]²⁺[B(C₆F₅)₄]^?₂, which exhibited high activity when combined with iBu₃Al (1120 kg/g‐Cr/h; ~4 times that of the original Sasol system composed of Cr (acac)₃, iPrN(PPh₂)₂, and MAO). Via the introduction of bulky trialkylsilyl substituents such as –SiMe₃, –Si(nBu)₃, or –SiMe₂(CH₂)₇CH₃ at the para‐position of phenyl groups in 1 (i.e., by using [CH₃(CH₂)₁₆]₂C(H)N[P(C₆H₄‐p‐SiR₃)₂]₂ instead of 1 ), the activities were dramatically improved, i.e., tripled (2960–3340 kg/g‐Cr/h; more than 10 times that of the original Sasol system). The generation of significantly less PE (<0.2 wt%) even at a high temperature is another advantage achieved by the introduction of bulky trialkylsilyl substituents. NMR studies and DFT calculations suggest that increase of the steric bulkiness on the alkyl‐N and P‐aryl moieties restrict the free rotation around (alkyl)N–P (aryl) bonds, which may cause the generation of more robust active species in higher proportion, leading to extremely high activity along with the generation of a smaller amount of PE.     

Effect of irradiation for sterilization on beverage reference materials for the analysis of food additives

Accreditation and Quality Assurance - Reference materials for proficiency testing (PT) were prepared for 6&nbsp;years. The target analytes were food additives, sorbic acid, benzoic acid, and...     

A BODIPY-based highly emissive dye with thiophene-based branch harvesting the light

ABSTRACT

A novel BODIPY-based dye with highly emissive character was configured by Sonogashira coupling and routinely characterized by NMR and MS technology. The emission of dye was investigated in solution/film/solid and shows intensive emission. In solution, the emission peak appeared around 510 nm with little influence by the polar environment. The terthiophene plays an effective antenna effect, harvesting the light and transferring the energy to BODIPY. The pseudo Stoke's shift enlarged to ～170 nm in solution. In film, the emission peak shifted to 563 nm in polycarbonate matrix. And it shifted further to 585 nm in solid due to the highly twisted structure, which avoided closely regular-tight packing. The dye rendered an intense fluorescence, good optothermal stability, and high fluorescence quantum yield (0.55). The solid emission showed highly red emission with Commission Internationale de L'Eclairage (CIE) coordinates of (X = 0.69, Y = 0.31). Thus, the synthesized dye is idea candidate for emitting materials.     

Exfoliation of 2D Materials for Energy and Environmental Applications

The fascinating properties of single-layer graphene isolated by mechanical exfoliation have inspired extensive research efforts toward two-dimensional (2D) materials. Layered compounds serve as precursors for atomically thin 2D materials (briefly, 2D nanomaterials) owing to their strong intraplane chemical bonding but weak interplane van der Waals interactions. There are newly emerging 2D materials beyond graphene, and it is becoming increasingly important to develop cost-effective, scalable methods for producing 2D nanomaterials with controlled microstructures and properties. The variety of developed synthetic techniques can be categorized into two classes: bottom-up and top-down approaches. Of top-down approaches, the exfoliation of bulk 2D materials into single or few layers is the most common. This review highlights chemical and physical exfoliation methods that allow for the production of 2D nanomaterials in large quantities. In addition, remarkable examples of utilizing exfoliated 2D nanomaterials in energy and environmental applications are introduced.     

LGP pattern design with single LED light source

We investigated optimize pattern design of a LGP for TFT-LCD with single LED. For the purpose, we introduced new concepts of pattern design most appropriate design for single light source, density adjustment design and radius adjustment design. And than compared the LGP output intensity distribution of the two cases with that of the uniform density pattern. As the result, above two types pattern design given a good result. Especially, the radius adjustment pattern design enhanced intensity uniformity definitely.     

Polyoxometalate‐Mediated One‐Pot Synthesis of Pd Nanocrystals with Controlled Morphologies for Efficient Chemical and Electrochemical Catalysis

Polyoxometalates (POMs), as inorganic ligands, can endow metal nanocrystals (NCs) with unique reactivities on account of their characteristic redox properties. In the present work, we present a facile POM‐mediated one‐pot aqueous synthesis method for the production of single‐crystalline Pd NCs with controlled shapes and sizes. The POMs could function as both reducing and stabilizing agents in the formation of NCs, and thus gave a fine control over the nucleation and growth kinetics of NCs. The prepared POM‐stabilized Pd NCs exhibited excellent catalytic activity and stability for electrocatalytic (formic acid oxidation) and catalytic (Suzuki coupling) reactions compared to Pd NCs prepared without the POMs. This shows that the POMs play a pivotal role in determining the catalytic performance, as well as the growth, of NCs. We envision that the present approach can offer a convenient way to develop efficient NC‐based catalyst systems.     

How Does Solvation Affect the Binding of Hydrophilic Amino Saccharides to Cucurbit[7]uril with Exceptional Anomeric Selectivity?

Cucurbit[7]uril (CB[7]) is known to bind strongly to hydrophilic amino saccharide guests with exceptional α‐anomer selectivities under aqueous conditions. Single‐crystal X‐ray crystallography and computational methods were used to elucidate the reason behind this interesting phenomenon. The crystal structures of protonated galactosamine (GalN) and glucosamine (GluN) complexes confirm the inclusion of α anomers inside CB[7] and disclose the details of the host–guest binding. Whereas computed gas‐phase structures agree with these crystal structures, gas‐phase binding free energies show preferences for the β‐anomer complexes over their α counterparts, in striking contrast to the experimental results under aqueous conditions. However, when the solvation effect is considered, the binding structures drastically change and the preference for the α anomers is recovered. The α anomers also tend to bind more tightly and leave less space in the CB[7] cavity toward inclusion of only one water molecule, whereas loosely bound β anomers leave more space toward accommodating two water molecules, with markedly different hydrogen‐bonding natures. Surprisingly, entropy seems to contribute significantly to both anomeric discrimination and binding. This suggests that of all the driving factors for the strong complexation of the hydrophilic amino saccharide guests, water mediation plays a crucial role in the anomer discrimination.